The construction of glass insulation coatings has always been a big problem. Because the base surface is too smooth and mostly erected, the general method is difficult to achieve the expected effect, and faced with many failures, the construction has become a test for the workers, the construction master Must have multiple construction experience and arm balance, superior endurance and so on.
The glass insulation coating construction methods mainly include spraying, leaching and smearing. Different problems will occur depending on the construction area, construction environment and the proficiency of the construction personnel. How to solve these problems? The research personnel of Foshan Ruipeim Intelligent Coatings have carried out many construction tests and summaries, and have detailed analysis and reasonable treatment methods for how to solve the problems in the construction of glass heat-insulating coatings. It is hoped that consumers will have a glass base construction. Helped.
1. Spraying: It is also called water spray spraying method. It is constructed by using a small watering can. This method is applied to the construction of small and medium-sized glass.
Advantages: fast speed and uniform coating;
Disadvantages: there is a watermark that affects the transparency of the glass;
Solution: increase the pressure of the watering can, so that the sprayed liquid is atomized as much as possible. The smaller the volume of the sprayed water mist, the smaller the watermark point, which can greatly reduce the generation of the watermark;
2, shower: watering can and small coating machine can be used for construction, mainly for large glass curtain wall, large area of ​​glass surface.
Advantages: fast speed, uniform coating and high transparency;
Disadvantages: the construction is difficult, and it is prone to the phenomenon of fluency;
Solution: Change the water flow of the spout. The construction personnel must have experience in multiple constructions and have excellent endurance to ensure the balance of the arm, with a view to success;
3, smear: use a sponge, rag directly to the surface of the glass, suitable for small glass surface of a single block.
Advantages: Simple construction, no need for any technology consumers can build their own;
Disadvantages: there are scratches that affect the transparency effect;
Solution: Do not use too much fluid in the sponge. Do not apply too much force when applying. Try to reduce the scratch on the surface of the coating by applying it horizontally and vertically.
After many years of construction experience, Ripham smart glass insulation coatings have summed up a perfect glass insulation coating construction method, which can effectively solve the problem of poor construction of glass insulation coatings, and create a simple, The quick construction method makes environmental protection and energy saving between home and home. It is our expectation.
Bride Supplies,Bride's Haeddress,Wedding Wig Crepe,Cotton Bride Hat
Zhejiang Jiateng Trade Co.,Ltd. , https://www.kato-trade.com